Essential Steps for Installing a New Shower Unit

Essential Steps for Installing a New Shower Unit

Blog Article

Call

Just about every person seems to have his or her own assumption when it comes to How to Install a Direct-to-Stud Shower Enclosure.

An effective shower installment needs careful preparation and a lot of work. In most cases, you will require to do three kinds of jobs: framing walls, installing the plumbing, and ending up wall surfaces.

Prep work

To start with, you have to pick the type of shower that you want to install. It is necessary to establish whether the picked shower is capable of handling specific systems and also can manage a risk-free level of water through the central heating boiler. Most shower devices nowadays are developed to be flexible to various water stress (such as stored warm water as well as cold mains).
It is additionally vital to take into consideration the water stress and also the planning of the piping and also water drainage for the shower

Various Types of Shower Units

Push-on Mixer: The pipe and also spray parts of the push-on mixer shower system can be attached to the bath faucet according to your demand, and the water temperature can be readjusted by means of the faucets. Push-on mixers are cheap as well as very straightforward to mount. Nevertheless, although the hose connection is basic, it is quickly dislodged. Additionally, it is troublesome to readjust the temperature level.

Bath/Shower Mixer: The tube as well as spray of this sort of shower are incorporated with a bath mixer faucet, as well as the temperature can be readjusted via the bathroom faucets. It is a very low-cost choice and no extra plumbing is involved. Nevertheless, the bath/shower mixers also struggle with bothersome temperature level control choices.

Manual Mixer: The hose pipe and spray of a hands-on mixer shower device belong of the wall surface unit and also the cold and hot water supplies are connected to a single shutoff The temperature level as well as pressure of the water are controlled through either one or a range of handles (in much more expensive showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are extra costly than the formerly stated mixers. They additionally need additional plumbing of cold and hot supply of water pipelines.

Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall device as well as the hot and cold water supplies are connected to a single valve below too. It is complete with a built-in stabiliser to self-adjust the water temperature and also to avoid it from becoming as well hot. Among the greatest advantages of a thermostatic mixer shower kind consists of practical temperature level control. However, it is the most expensive of the various mixer alternatives.

Power Shower: A power shower is a single device including a powerful electric pump that is capable of modifying both the water pressure and temperature. This type of shower can be fitted if there is water system from a cold water cistern and also a warm water cyndrical tube. A power shower makes the adjustment of both pressure and also temperature level very easy. On the other hand, it disagrees for water warmed straight by the shower or where the water is supplied by a mix boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it heats the water electrically. It is very important to keep in mind that for this shower kind to be installed, the mains pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature and stress to be adjusted via a handle. Models with temperature level stabilisers are much better as they remain unaffected by various other faucets somewhere else in use within the family. A major drawback of electrical showers is that the control handle only enables the option of high temperatures at less stress, or lower temperatures at a better stress. This is troublesome in the winter season when the spray is commonly weak and the keys water is chillier. Nevertheless, this issue is tackled in some versions which are offered with a winter/summer setting.

Approach

Depending upon the sort of shower you wish to mount, the shower head should either be suited order to avoid its contact with the water in the bath below or the base tray, or it needs to have a check valve.
Before starting, it is recommended to note the positions of the shower head as well as control, as well as to prepare the pipe-work entailed. Additionally, the drainage system to remove the waste water will certainly need to be intended. Both positions of the wire course and also the shower button will additionally require to be thought about if a rapid or electrical shower unit is being mounted.
Use the guideline guide provided with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is essential to remove the water system. In order to shield the pipes, they need to be given a water-proof covering and likewise fitted with separating valves. The pipelines can after that be buried into the wall surface and glued over to neaten the overall look.
Fit the base tray, shower head, and also fittings.
Connect the main shower control to the pipelines that will certainly be providing the water (This might need a female screw string adapter).
Reconnect the supply of water and also test the pipes for any leakages, as some may need firm.
If you are mounting an electric shower, keep in mind to turn off the electricity supply before making any type of electric connections. Once these connections have been made (there ought to be support within the instruction manual), the power supply can be changed back on.

Readjusting Water Pressure to Fit Your Shower

The cold water tank can be raised to a greater height (in some cases as low as 150mm (6inches)) by installation a solid wooden assistance underneath it - possibly composed of struts as well as blockboards. If you choose this choice, the major and circulation pipes will also have to be elevated to meet the brand-new elevation of the reservoir.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it needs to be attached into the power supply in order to operate.

Piping as well as Drainage

It is best to make use of 15mm size supply pipes, and make the go to the shower as brief and straight as feasible so as to preserve optimal pressure as well as reduce warmth loss. In addition, by reducing using elbow joints for pipeline edges, you can reduce the resistance in the flow of the water system. You can achieve this by bending the pipelines instead.

Most Common Errors

Going against or overlooking local code limitations.

Using pipes that are as well small.

Affixing copper to galvanized without making use of a brass or dielectric fitting between the two.

Not utilizing tape or pipe substance at threaded joints.

Uneven your components when installing them.

Not setting up an air space filling up for components.

Cutting supply stub outs too short to install the shutoff valves onto after the ended up wall surface remains in location.

Not correctly lining up tubing into fittings or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubing goes to an angle will certainly cause a leak.).

When transforming the water back on in your house, always run the outdoors hose shutoff or purge your toilets to bleed dirt as well as air from the lines. This particles can cause problems in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you liked our post on How to Install a Shower Enclosure . Thank you so much for taking time to read through our piece. Sharing is caring. Helping others is fun. Many thanks for taking the time to read it.

Request An Estimate

Report this page